The Happy Campers Package
The Stryker LX 320 and a Mercury 9.9HP is the perfect match for you and your camper/RV. Aluminum floor model comes with 2 separate bags that will fit in most vehicles and or RV storage compartments. With the electric pump you can get your boat together in about 15 minutes (or less if you hustle!). Picture yourself at your campsite, inflating your boat and on the water in no time at all.
$7,114.88 USD
Looking for the perfect match for your RV or camper when you're fishing and lake camping? Look no further! The Stryker Inflatable Boats Happy Camper's Package is for you. We've put together the perfect inflatable boat package for you to maximize your fun on the water while minimizing the effort needed in transport and setup.
When you set up basecamp at your lakeside hideaway, just inflate your boat and you're on the water in no time. The Stryker LX 320 is a mid-size inflatable boat that can be easily deflated and transported with the rest of your camping gear. We've included the BTP12 Electric Pump to inflate your boat within 15 minutes. The aluminum floor model comes with 2 separate bags that will fit in most vehicles and or RV storage compartments. No trailer necessary. We ship to campers and boaters across the United States and Canada - from Florida to our home in British Columbia.
The included Mercury 9.9HP fits perfectly with your LX 320 and is also small enough to transport to your next lakeside location. Launching wheels gets you from campsite to water in no time.
The Stryker LX 320 inflatable boat is available in Storm Grey or Rescue Red. Airmat flooring options available in Storm Grey only.
Included in the Happy Campers Package:
- LX 320
- Mercury 9.9HP
- Standard Launching Wheels (Not Installed)
- BTP12 Electric Pump
- 2 x Cup Holders
Why the LX 320 is perfect for shoreline camping:
The Stryker LX 320 is perfect for campers looking for a light-weight, fully optioned boat. The Stryker LX 320 comes with the additional bottom protection of 1.2mm fabric with our signature Stryker Shield® hull protection, so you can get from shore to floatation without damaging the inflatable components. Stryker Shield® is an 8” wide corrugated rubber strip that protects the bottom of the tubes and keel. Stryker Inflatable Boats are constructed with the highest grade imported German Mehler PVC using the latest thermowelding technology. Thermowelding is a process using heat welding that bonds the material together that creates superior strength and durability over the traditional 4 layer overlapping seam technology used by most companies.
SIZE
- Overall Length: 320cm or 10′ 5″
- Inside Length: 212cm or 6′ 9″
- Overall Width: 152cm or 4′ 10″
- Inside Width: 66cm or 2′ 2″
- Shipping Weight: Air Floor- 133 lbs, Aluminum Floor 167 lbs
- Tube Diameter: 43 cm or 1′ 4″
- # of Air Chambers: 4
- PVC Thickness: 1.2mm & .9mm
- Dimensions of Boat in Bag: 44 x 28 x 14″
- Boat Only Weight: 98 lbs
- Dimensions of Aluminum Floor in Bag: 36 x 24 x 4″
- Aluminum Floor Only Weight: 41 lbs
- Airmat Floor Only Weight: 10 lbs
CAPACITY
- Max Load: 691kg or 1523lbs
- Max # people: 5
- Max Motor: 15 HP
- Max Motor Weight: 60kg or 132lbs
- Transom Height: 15”
- Max Tube Pressure: 3.6 psi
- Foot Pump (Hand Pump for Air Mats)
- Bow Bag
- Seat Bag
- Repair Kit
- 2 x Aluminum Bench Seat
- Boat Bag
- Floor bag (for aluminum floor models only)
- Under Seat Bag
- Aluminum Oars
- Mercury 9.9HP
- Standard Launching Wheels (Not Installed)
- BTP12 Electric Pump
- 2 x Cup Holders
Recommended Accessories
Add An Engine
No posts found
Reviews